{"title":"3D Print Files","description":"\u003cp\u003eIn this collection you will find Boats, Trailers and Drives as \u003cstrong\u003eDigital Downloads\u003c\/strong\u003e for self-3D-printing.\u003c\/p\u003e\n\u003cp\u003eYour download of the files packages will be available immediatly after the purchase.\u003c\/p\u003e\n\u003cp\u003eDownload will contain the files in \u003cstrong\u003eSTL, Step\u003c\/strong\u003e and \u003cstrong\u003e3mf\u003c\/strong\u003e as well as instructuions for printing and assembling.\u003c\/p\u003e\n\u003cp\u003eYou will also find an extensive BoM with all the needed hardware equipment.\u003c\/p\u003e","products":[{"product_id":"deathboat-1-6-scale-have-it-all-river-jet-boat-hpw40-incl","title":"DEATHBOAT - 1\/6 Scale River Jet Boat - HPW40 incl. - HAVE-IT-ALL","description":"\u003cdiv\u003eGo print your own Shreddy Deathboat\/Mojo!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOur river jet boat DEATHBOAT in 1\/6 scale was developed according to this motto.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by a 40 mm\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ejet drive with an attached 2.2 kW brushless motor on 3-6S LiPos.\u003cbr\u003eYou can also install your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 35\u003c\/strong\u003e. There are separate print files for these pumps also as part of the files package.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, HPW40 jet drive, deck, rollcage, roof, visor and add-on parts.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEATHBOAT is the successor and the logical development of our popular JET THE RIPPER\/SPEEDSTER boat.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNew features are the following:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eM-Jet 30 and M-Jet 35 compatible\u003c\/li\u003e\n\u003cli\u003ehull in latest design with connector instead of tongue and groove\u003c\/li\u003e\n\u003cli\u003ehull with chines, resulting in sharper\/racier cornering\u003c\/li\u003e\n\u003cli\u003etrim plates\u003c\/li\u003e\n\u003cli\u003eeasy-access deck's lid, fast battery change\u003c\/li\u003e\n\u003cli\u003enew deck sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e3 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEATHBOAT - Rollcage version\u003cbr\u003eRIPPER - Windshield version (with roof and LED)\u003cbr\u003eSPEEDSTER - Visor version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 120 different print parts, with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (76 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThe Upgrade Kit is also, which contains:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. \"Flash\" Planking (multi-color print 3mf included):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Front\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Lid (with or wihtout HillPrinties logo)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Rear\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2. Rollcage Spoiler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Spoiler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- adapted Sidepanels (Standard Thinkness and 2,5 mm thick ones)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3. Fireextinguisher (multi-color print 3mf included):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- fits into the holes of the rollcage backside\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1eswHq536R7BtcUlxjxKcjm4pzl5SCyEF?usp=sharing\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with Polymaker PolyLite ASA and ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 880 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 355 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 282 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,200 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 5.340 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003ca href=\"https:\/\/youmagine.com\/hillprinties\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTheir are two matching trailers for the Axial SCX6 available:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/trailer-for-deathboat-1-6-scale-trailer-for-axial-scx6?variant=56783083569530\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTheir are two matching trailers for the Axial SCX6 available:\u003cbr\u003e\u003cbr\u003eA beefy Blake Wilkey style Baja trailer \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/deathboat-baja-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783225422202\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eAnd a more convinient trailer \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/trailer-for-deathboat-1-6-scale-trailer-for-axial-scx6?variant=56783083569530\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ESC 180A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-6s Lipo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIf you want to build the boat with an M-Jet Pump follow these links:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eM-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003eM-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56757997601146,"sku":null,"price":46.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_0959_9ae14a50-5229-44ff-849b-640856c7b77a.jpg?v=1776407402"},{"product_id":"deathboat-1-6-scale-river-jet-boat-w-o-pump","title":"DEATHBOAT - 1\/6 Scale - River Jet Boat - W\/O Pump","description":"\u003cdiv\u003eGo print your own Shreddy Deathboat\/Mojo!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOur river jet boat DEATHBOAT in 1\/6 scale was developed according to this motto.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is designed to integrate your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 35\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ejet drive.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, M-Jet 30 or M-Jet 35 integration, deck, rollcage, roof, visor and add-on parts.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEATHBOAT is the successor and the logical development of our popular JET THE RIPPER\/SPEEDSTER boat.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNew features are the following:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eM-Jet 30 and M-Jet 35 compatible\u003c\/li\u003e\n\u003cli\u003ehull in latest design with connector instead of tongue and groove\u003c\/li\u003e\n\u003cli\u003ehull with chines, resulting in sharper\/racier cornering\u003c\/li\u003e\n\u003cli\u003etrim plates\u003c\/li\u003e\n\u003cli\u003eeasy-access deck's lid, fast battery change\u003c\/li\u003e\n\u003cli\u003enew deck sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e3 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEATHBOAT - Rollcage version\u003cbr\u003eRIPPER - Windshield version (with roof and LED)\u003cbr\u003eSPEEDSTER - Visor version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 120 different print parts, with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (76 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThe Upgrade Kit is also, which contains:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. \"Flash\" Planking (multi-color print 3mf included):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Front\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Lid (with or wihtout HillPrinties logo)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-Rear\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2. Rollcage Spoiler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Spoiler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- adapted Sidepanels (Standard Thinkness and 2,5 mm thick ones)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3. Fireextinguisher (multi-color print 3mf included):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- fits into the holes of the rollcage backside\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1eswHq536R7BtcUlxjxKcjm4pzl5SCyEF?usp=sharing\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with Polymaker PolyLite ASA and ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 880 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 355 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 282 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,200 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 5.340 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTheir are two matching trailers for the Axial SCX6 available:\u003cbr\u003e\u003cbr\u003eA beefy Blake Wilkey style Baja trailer \u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/deathboat-baja-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783225422202\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eAnd a more convinient trailer \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/trailer-for-deathboat-1-6-scale-trailer-for-axial-scx6?variant=56783083569530\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x M-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003e1x M-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE - The M-JET pumps are not part of that offer !!!\u003cbr\u003eNOTE - In this offer the HPW40 jet pump is NOT included\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56758403268986,"sku":null,"price":37.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_0959-Kopie.jpg?v=1776407338"},{"product_id":"purple-ace-1-6-scale-sprint-jet-boat-hpw40-incl","title":"PURPLE ACE - 1\/6 SCALE SPRINT JET BOAT - HPW40 INCL.","description":"\u003cdiv\u003eIncluding HPW40 2-Stage Water Jet Pump water jet drive!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThis design is a true-to-original RC model of the popular Sprint jet boats in 1\/6 scale. The model is powered by our HPW40 jet drive with attached 2.2 kW brushless motor on 3-6S LiPos. The print data includes all necessary data for printing the hull, jet drive, V8 motor cover, waterproof Lipo boxes, roll cage, boat stand and accessories. Purple Ace is extremely maneuverable and fast. It's a lot of fun, both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (21 pages) as well as illustrated printing instructions (14 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1TYSPMtHJxCdiPZ5n4BmPwVIK2uVc0Yxr?usp=drive_link\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA, PETG or ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe boat is designed with an open structure, the sensitive LiPos are housed in 2 waterproof boxes. The receiver is also located in a waterproof box.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThis means that there are no limits to appropriate use. For particularly demanding trips, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 843 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 284 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 210 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 2000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 4040 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eESC 150A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3s Lipo (5200 mAh, maximum dimensions 160x46x28.5)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e3-channel remote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all parts listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: Driver (Ken) and co-driver (Sven) are important members of HillPrinties and are NOT part of the offer.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 200x200x205 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut separately.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56758510485882,"sku":null,"price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_20230914_071600_1.jpg?v=1774952317"},{"product_id":"trailer-for-deathboat-1-6-scale-trailer-for-axial-scx6","title":"TRAILER for DeathBoat - 1\/6 Scale Trailer for AXIAL SCX6","description":"\u003cdiv\u003eThis design is a true-to-original trailer for your Axial SCX6 RC model to launch the popular 1\/6th scale river jet boats \"DeathBoat\", \"Jet The Ripper\" and \"Jet The Speedster\" in style. The model is characterized by its scale look, is equipped with 2 pendulum axles and offers space for a cable winch and the necessary electronics. The trailer can also be parked with a boat thanks to the extendable and retractable jockey wheel. The print data includes all the necessary data for printing the frame, axles, jockey wheel, storage box and accessories. The trailer has limited off-road capability and is fitted with 4 1:10 scale crawler tires (outer diameter 100 mm).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eGreat fun both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (19 pages) as well as illustrated printing instructions (23 pages). A complete parts list is also included as an Excel document. This contains a list of all required pressure parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1Se4A1DJj5ePVxrnHCT_GKh8CmaDJUEaE?usp=drive_link\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe required Rear Bumper for mounting the hitch is purchasable \u003ca href=\"https:\/\/hillprinties.com\/products\/rear-bumper-for-trailer-use-axial-scx6?variant=56783443100026\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThe model can be printed in PLA, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 997 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 380 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 218 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 1680 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 2940 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling for Axial SCX6, click \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/s.click.aliexpress.com\/e\/_oBVDeEu\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e4x 1\/10 scale crawler tires\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e8x oil pressure shock absorbers 80 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e12x ball bearings DIN 625 - 61800\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown in the photos is not part of the offer. You can find it here:\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/deathboat-1-6-scale-have-it-all-river-jet-boat-hpw40-incl?variant=56757997601146\" target=\"_blank\"\u003e1\/6 Scale DeathBoat\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eATTENTION: The vehicle shown is not part of the offer.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003ePrint bed dimensions: 220x240x175 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut separately.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783083569530,"sku":null,"price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/Trailer_3.4_c6bc210c-73be-4f6f-9bf8-c873fc3d8d68.png?v=1775814250"},{"product_id":"deathboat-baja-trailer-1-6-scale-trailer-for-axial-scx6","title":"BAJA TRAILER for DeathBoat - 1\/6 Scale Trailer for AXIAL SCX6","description":"\u003cdiv\u003eGet your Axial SCX6 RC model ready for the Blake Wilkey style DEATHBOAT TRAILER!!!\u003cbr\u003e\u003cbr\u003eWith this Trailer you can carry our boats \"DeathBoat\", \"Jet The Ripper\" and \"Jet The Speedster\" in style.\u003cbr\u003eThe model uses SCX6 Shocks and Tire\/Rims. There is also a set of 3D printable Rims included.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (25 pages) as well as illustrated printing instructions (21 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003cbr\u003e\u003cbr\u003eThe required Rear Bumper for mounting the hitch is purchasable \u003ca href=\"https:\/\/hillprinties.com\/products\/rear-bumper-for-trailer-use-axial-scx6?variant=56783443100026\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eAll documents are listed \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/11ZtIIM17HcYQLSZg4clhynWEZMSgwmVH?usp=drive_link\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA+, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1156 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 497 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 257 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 1800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 3200 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe following components are additionally required and are not part of the offer:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling for Axial SCX6, click \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_oBVDeEu\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2x 1\/6 scale SCX6 crawler tires\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x SCX6 oil pressure shock absorbers\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4x ball bearings DIN 625 - 61800\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown on the photos is not part of the offer. You can find it here:\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/deathboat-1-6-scale-have-it-all-river-jet-boat-hpw40-incl?variant=56757997601146\" rel=\"noopener\" target=\"_blank\"\u003e1\/6 Scale DeathBoat\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eATTENTION: The vehicle shown is not part of the offer.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783225422202,"sku":null,"price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8657.jpg?v=1775815690"},{"product_id":"rear-bumper-for-trailer-use-axial-scx6","title":"Rear BUMPER for Trailer Use - AXIAL SCX6","description":"\u003cp\u003e\u003cspan\u003eThis design contains all print files for a Rear Bumper for the AXIAL SCX6 Crawler to proper mount a trailer hitch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAdditional purchase parts needed:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSCX6 compatible hitch \u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_Dlvrtr5\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4 Screws DIN 912 - M3 x 30 \u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_c4Eiu6GX\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4 Nuts DIN 985 - M3 \u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_DlJ6jez\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: \u003cspan\u003e240 x 240 x 50 mm\u003c\/span\u003e (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783443100026,"sku":null,"price":8.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_0621.jpg?v=1775817792"},{"product_id":"hpw40-2-stage-water-jet-pump","title":"HPW40 2-Stage Water Jet Pump","description":"\u003cdiv\u003eThis design is a true-to-original 2-stage water jet drive for RC models.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe jet drive has a nominal diameter of 40 mm and is designed for operation with a 2.0-2.5 kW brushless motor on 3-6S LiPos.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe print data includes 3 assemblies:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003col\u003e\n\u003cli\u003eHPW40 water jet drive with control nozzle\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHPW40 water jet drive with control nozzle and reverse flap\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eV8 motor cover\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv\u003eAll necessary data for printing the housing, stator, stator housing, impellers and accessories are included.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNOTE:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe jet drive can be installed in any boat thanks to the included hull insert. The hull insert can simply be glued into your hull.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe HPW40 is extremely powerful and achieves amazingly high top speeds for jet propulsion systems. Thanks to the 2-stage design, our water jet drives are insensitive to the intake of air.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe drive is a lot of fun, both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (19 pages) as well as illustrated printing instructions (23 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, servo, etc.)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1LY7p17aqS86D5BxvQzZkV6MAtD0CQ9DG?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehere\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model should preferably be printed in ABS, alternatively an attempt can also be made to print in PLA+, PLA tough or CF filaments.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 284 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength with 4074 motor: 358 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 114 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 106 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 300 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 940 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eESC 150A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3s Lipo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1-2 25 kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x shaft seal ring 5x16x5\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x sealed stainless steel ball bearing 5x13x4\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ground 5 mm stainless steel shaft 200 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eVarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: \u003cspan\u003e150x150x175 \u003c\/span\u003emm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783487205754,"sku":null,"price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/HPW40_HD_5.png?v=1775818321"},{"product_id":"jetling-1-6-scale-jet-fishing-boat-have-it-all-incl-hpw40-jet-pump","title":"JETLING - 1\/6 Scale - Jet Fishing Boat - HPW40 incl. - HAVE-IT-ALL","description":"\u003cdiv\u003eYou love oldschool overpowered little fishing boats?\u003cbr\u003e\u003cbr\u003eHere is our 1\/6 Scale JETLING! The Jet pump powered sibling of our popular FJORDLING.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by a 40 mm\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ejet drive with an attached 2.2 kW brushless motor on 3-6S LiPos.\u003cbr\u003eYou can also install your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 35\u003c\/strong\u003e. There are separate hull print files for these pumps also as part of the files package.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, HPW40 jet drive, deck, roof and add-on parts. In this set the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40 Jet Pump\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis also\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eincluded\u003c\/strong\u003e.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003eRACE - deck version\u003c\/div\u003e\n\u003cdiv\u003eECO - deck version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 165 different print parts (plus the ones from the outboard), with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (67 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1-FmGm8t_pCGvex5hoFO4MsukrnLANZmj?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with eSUN ASA+ and ABS+.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca href=\"https:\/\/hillprinties.com\/products\/fjordling-jetling-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783534457210\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eTechnical data:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eLength: 1034 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 373 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 271 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,400 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 4.900 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ESC 160A+\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-6s Lipo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003eIf you want to build the boat with an M-Jet Pump follow these links:\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eM-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003eM-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783510045050,"sku":null,"price":46.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8597.jpg?v=1775818811"},{"product_id":"jetling-1-6-scale-jet-fishing-boat-w-o-jet-pump","title":"JETLING - 1\/6 Scale - Jet Fishing Boat - W\/O Jet Pump","description":"\u003cdiv\u003eYou love oldschool overpowered little fishing boats?\u003cbr\u003e\u003cbr\u003eHere is our 1\/6 Scale JETLING! The Jet pump powered sibling of our popular FJORDLING.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is supposed to bepowered by a 40 mm\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ejet drive with an attached 2.2 kW brushless motor on 3-6S LiPos.\u003cbr\u003eYou can also install your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 35\u003c\/strong\u003e. There are separate print files for these pumps also as part of the files package.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, deck, roof and add-on parts. In this set the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40 Jet Pump\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis also\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincluded. Also the M-Jet pump need to be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epurchased separately\u003c\/strong\u003e!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003eRACE - deck version\u003c\/div\u003e\n\u003cdiv\u003eECO - deck version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 165 different print parts (plus the ones from the outboard), with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (67 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1-FmGm8t_pCGvex5hoFO4MsukrnLANZmj?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with eSUN ASA+ and ABS+.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca href=\"https:\/\/hillprinties.com\/products\/fjordling-jetling-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783534457210\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1034 mm\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWidth: 373 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 271 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,400 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 4.900 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e1x M-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003e1x M-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE - The M-JET pumps are not part of that offer !!!\u003cbr\u003eNOTE - In this offer the HPW40 jet pump is NOT included\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783519482234,"sku":null,"price":35.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8597-Kopie.jpg?v=1775820034"},{"product_id":"fjordling-jetling-trailer-1-6-scale-trailer-for-axial-scx6","title":"TRAILER Fjordling\/Jetling - 1\/6 Scale Trailer for AXIAL SCX6","description":"\u003cdiv\u003eGet your Axial SCX6 RC model ready for the Fjordling\/Jetling TRAILER!!!\u003cbr\u003e\u003cbr\u003eWith this Trailer you can carry your boats \"FJORDLING\" and \"JETLING\" in style.\u003cbr\u003eThe model uses 1\/10 Scale Crawler Shocks and Tire\/Rims.\u003cbr\u003eThere are also a set of 3D printable TPU tires and rims included.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (25 pages) as well as illustrated printing instructions (21 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003cbr\u003e\u003cbr\u003eThe required Rear Bumper for mounting the hitch is purchasable \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/rear-bumper-for-trailer-use-axial-scx6?variant=56783443100026\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eAll documents are listed \u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1HPE9H15fIOBLnZpYvUUiqMXn5tPFKjGy?usp=drive_link\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA+, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1212 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 356 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 207 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 2000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 2800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling for Axial SCX6, click \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/s.click.aliexpress.com\/e\/_oBVDeEu\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4x 1\/10 scale crawler tires with 12 mm hex (or you print the TPU tires)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e8x 1\/10 scale crawler oil pressure shock absorbers 80 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e8x ball bearings DIN 625 - 61800\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown on the photos is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epart of the offer.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYou can find the boat here\u003c\/strong\u003e:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/fjordling-1-6-scale-outboard-fishing-boat-have-it-all?variant=56783562703226\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e1\/6 Scale Fjordling\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/jetling-1-6-scale-jet-fishing-boat-have-it-all-incl-hpw40-jet-pump?variant=56783510045050\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e1\/6 Scale Jetling\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eATTENTION: The vehicle shown is not part of the offer.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783534457210,"sku":null,"price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_9173.png?v=1776174326"},{"product_id":"fjordling-1-6-scale-outboard-fishing-boat-have-it-all","title":"FJORDLING - 1\/6 Scale - Outboard Fishing Boat - HAVE-IT-ALL","description":"\u003cdiv\u003eYou love oldschool overpowered little fishing boats?\u003cbr\u003e\u003cbr\u003eHere is our 1\/6 Scale FJORDLING!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by our own 3D-printed Outboard with an attached 2.2 kW brushless motor on 3-4S LiPos (6S to your own responsibility).\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, deck, roof and add-on parts. In this set the Outboard is also included.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003eRACE - deck version\u003c\/div\u003e\n\u003cdiv\u003eECO - deck version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 165 different print parts (plus the ones from the outboard), with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (52 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1GFuP8NtlqGpyi6nHKCRzo5QzzWymYzzu?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with eSUN ASA+ and ABS+.\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/fjordling-jetling-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783534457210\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1063 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 373 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 347 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,400 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 4.900 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ESC 160A+\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-4s Lipo (6s to your own responsibility)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e1x servo winch (for the outboard)\u003cbr\u003e\u003cbr\u003e1x water pump (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783562703226,"sku":null,"price":51.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8290.jpg?v=1775821277"},{"product_id":"fjordling-1-6-scale-outboard-fishing-boat-w-o-outboard","title":"FJORDLING - 1\/6 Scale - Outboard Fishing Boat - W\/O Outboard","description":"\u003cdiv\u003eYou love oldschool overpowered little fishing boats?\u003cbr\u003e\u003cbr\u003eHere is our 1\/6 Scale FJORDLING!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by our own 3D-printed Outboard with an attached 2.2 kW brushless motor on 3-4S LiPos (6S to your own responsibility).\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, deck, roof and add-on parts.\u003cbr\u003e\u003cstrong\u003eIn this set the Outboard is NOT also included.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFJORDLING is our first outboard boat and will mark a series of outboard boats coming in the future.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 BOAT VERSION IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003eRACE - deck version\u003c\/div\u003e\n\u003cdiv\u003eECO - deck version\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 165 different print parts, with a total of over 250 components to be printed. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (52 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1GFuP8NtlqGpyi6nHKCRzo5QzzWymYzzu?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with eSUN ASA+ and ABS+.\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/fjordling-jetling-trailer-1-6-scale-trailer-for-axial-scx6?variant=56783534457210\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1063 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 373 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 347 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 3,400 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 4.900 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ESC 160A+\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-4s Lipo (6s to your own responsibility)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e1x servo winch (for the outboard)\u003cbr\u003e\u003cbr\u003e1x water pump (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783577579898,"sku":null,"price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8290-Kopie.jpg?v=1775821806"},{"product_id":"hpw250rt-1-6-scale-trimmable-outboard","title":"HPW250RT - 1\/6 Scale - Trimmable Outboard","description":"\u003cdiv\u003eThis model is a 1\/6 scale version of a Mercury 250R style Outboard.\u003cbr\u003e\u003cbr\u003ePowered by a 2.2 kW brushless motor on 3-4S LiPos (6S to your own responsibility) and trimmable by a Injora servo winch this is a unique design and able to push forward your Scale Model.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing outboard housing, drive case, props, brackets etc.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHPW250RT is our first outboard boat and will fit a series of outboard boats coming in the nearby future.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e2 VERSIONS IN ONE - you have the choice!!!\u003cbr\u003e\u003cbr\u003eHPW250RT - trimmable outboard with Injora Servo Winch\u003c\/div\u003e\n\u003cdiv\u003eHPW250R - Fix-trim outboard with trim sticks\u003cbr\u003e\u003cbr\u003eMotor and ESC are watercooled by an electric water pump.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of approx. 30 different print parts. The resulting level of detail is outstanding.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (32 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1tKsOUd4YrYL-pWMkDP55nlzE_ZnpDtzc?usp=drive_link\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1tKsOUd4YrYL-pWMkDP55nlzE_ZnpDtzc?usp=drive_link\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with eSUN ASA+ and ABS+.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 178 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 90 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 347 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 531 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 1.000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ESC 160A+\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-4s Lipo (6s to your own responsibility)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e1x servo winch (for the outboard)\u003cbr\u003e\u003cbr\u003e1x water pump (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: \u003cspan\u003e150x150x150\u003c\/span\u003e mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783606808954,"sku":null,"price":25.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_8433-Kopie.jpg?v=1776426328"},{"product_id":"defender-22-1-6-scale-twin-outboard-boat-have-it-all","title":"DEFENDER 22 - 1\/6 Scale - Twin Outboard Boat - HAVE-IT-ALL","description":"\u003cdiv\u003eHere is our 1\/6 Scale DEFENDER 22 (JasperMarine inspired) !\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by 2 of our own 3D-printed Outboards with an attached 2.2 kW brushless motor on 3-4S LiPos (6S to your own responsibility).\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, cabin, lids, front seatgroup and all the many accesories.\u003cbr\u003e\u003cstrong\u003eIn this set the Outboard IS also included.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEFENDER 22 is our second outboard boat and continous our series of outboard boats.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe DEFENDER 22 is is characterized by its high functionality which is outstanding for 3d printable RC boats.\u003cbr\u003eThese are the unique features:\u003cbr\u003e\u003cbr\u003eBow Thruster\u003cbr\u003eWorking Anchor\u003cbr\u003eLED Front Light \u003cbr\u003eLED Cabin Lights\u003cbr\u003eSlidable Windows\u003cbr\u003eFully functional Front and Rear Doors\u003c\/div\u003e\n\u003cdiv\u003eQuick Release Lid\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of more than 265 different print parts, with a total of over 750 components to be printed. The resulting level of detail is outstanding and unique for 3d printable RC boats.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (83 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/16gAGFvDzsr36cmAlMuMNbGoi4xUeRFeb?usp=drive_link\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/16gAGFvDzsr36cmAlMuMNbGoi4xUeRFeb?usp=drive_link\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA+, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAs this is our most complexe Hull ever made it is highly recommended to print it in PLA+. That will lead to a much smoother assembly because warping won't be an issue. For me eSUN PLA+ worked exceptionally well for that boat.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOverall Length: 1460 mm\u003cbr\u003e\u003cbr\u003eLength: 1250 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 435 mm\u003cbr\u003e\u003cbr\u003eOverall Height: 600 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 454 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 12.000 g\u003cbr\u003e-\u0026gt; Hull: approx. 7.000 g\u003cbr\u003e-\u0026gt; Cabin: approx. 2.700 g\u003cbr\u003e-\u0026gt; Planking: approx. 800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 15.000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 4074 1400kV brushless motor (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x ESC 160A+ (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-4s LiPo 9500 mAH (6s to your own responsibility)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e3x servo winch (for the outboard and anchor)\u003cbr\u003e\u003cbr\u003e2x water pump (for the outboard)\u003cbr\u003e\u003cbr\u003e1x 1306 3000kV brushless motor (for the bow thruster)\u003cbr\u003e\u003cbr\u003e1x 16A ESC (for the bow thruster)\u003cbr\u003e\u003cbr\u003e1 x 3S 1300mAH LiPo (for the bow thruster)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 256x256x256 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783614771578,"sku":null,"price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/unnamed_01201f08-d7bd-485a-97c2-e49e851caac4.jpg?v=1775822790"},{"product_id":"defender-22-1-6-scale-twin-outboard-boat-w-o-outboards","title":"DEFENDER 22 - 1\/6 Scale - Twin Outboard Boat - W\/O Outboards","description":"\u003cdiv\u003eHere is our 1\/6 Scale DEFENDER 22 (JasperMarine inspired) !\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by 2 of our own 3D-printed Outboards with an attached 2.2 kW brushless motor on 3-4S LiPos (6S to your own responsibility).\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, cabin, lids, front seatgroup and all the many accesories.\u003cbr\u003e\u003cstrong\u003eIn this set the Outboard is NOT included.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eDEFENDER 22 is our second outboard boat and continous our series of outboard boats.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe DEFENDER 22 is is characterized by its high functionality which is outstanding for 3d printable RC boats.\u003cbr\u003eThese are the unique features:\u003cbr\u003e\u003cbr\u003eBow Thruster\u003cbr\u003eWorking Anchor\u003cbr\u003eLED Front Light \u003cbr\u003eLED Cabin Lights\u003cbr\u003eSlidable Windows\u003cbr\u003eFully functional Front and Rear Doors\u003c\/div\u003e\n\u003cdiv\u003eQuick Release Lid\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of more than 265 different print parts, with a total of over 750 components to be printed. The resulting level of detail is outstanding and unique for 3d printable RC boats.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL\/Step + 3mf), the data package contains detailed, illustrated assembly instructions (83 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/16gAGFvDzsr36cmAlMuMNbGoi4xUeRFeb?usp=drive_link\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/16gAGFvDzsr36cmAlMuMNbGoi4xUeRFeb?usp=drive_link\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/16gAGFvDzsr36cmAlMuMNbGoi4xUeRFeb?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA+, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAs this is our most complexe Hull ever made it is highly recommended to print it in PLA+. That will lead to a much smoother assembly because warping won't be an issue. For me eSUN PLA+ worked exceptionally well for that boat.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOverall Length: 1460 mm\u003cbr\u003e\u003cbr\u003eLength: 1250 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 435 mm\u003cbr\u003e\u003cbr\u003eOverall Height: 600 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 454 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 12.000 g\u003cbr\u003e-\u0026gt; Hull: approx. 7.000 g\u003cbr\u003e-\u0026gt; Cabin: approx. 2.700 g\u003cbr\u003e-\u0026gt; Planking: approx. 800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 15.000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers!!!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 4074 1400kV brushless motor (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x ESC 160A+ (for the outboard)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 3-4s LiPo 9500 mAH (6s to your own responsibility)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e3x servo winch (for the outboard and anchor)\u003cbr\u003e\u003cbr\u003e2x water pump (for the outboard)\u003cbr\u003e\u003cbr\u003e1x 1306 3000kV brushless motor (for the bow thruster)\u003cbr\u003e\u003cbr\u003e1x 16A ESC (for the bow thruster)\u003cbr\u003e\u003cbr\u003e1 x 3S 1300mAH LiPo (for the bow thruster)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 256x256x256 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783626764666,"sku":null,"price":66.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/unnamed-Kopie_3.jpg?v=1775822950"},{"product_id":"big-jetty-1-6-scale-twin-engine-river-jet-boat-hpw40-incl-have-it-all","title":"BIG JETTY - 1\/6 Scale  Twin-Engine River Jet Boat - HPW40 Incl. - HAVE-IT-ALL","description":"\u003cdiv\u003eBig Is Beautiful!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOur twin-engine river jet boat BIG JETTY in 1\/6 scale was developed according to this motto.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is powered by two 40 mm HPW40 jet drives with an attached 2.2 kW brushless motor on 3-6S LiPos. You can also install your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 30\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eM-Jet 35\u003c\/strong\u003e. There are separate hull print files for these pumps also as part of the files package.\u003cbr\u003e\u003cbr\u003eThe print data includes all the necessary data for printing the hull, HPW40 jet drive, deck, cabin, roof, railing and add-on parts.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBIG JETTY is one of the largest and most comprehensive RC boats for self-printing on the market.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of 253 different print parts, with a total of 670 components to be printed. The resulting level of detail sets new standards.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBIG JETTY impresses with its sheer size and high functionality (sliding windows, sliding door, folding deck, folding ladder, lighting, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL + 3mf), the data package contains detailed, illustrated assembly instructions (122 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1R-oI169ac7jpPO8FSFkwSOGmQeaHh5IV?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with Polymaker PolyLite ASA and ABS.\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca href=\"https:\/\/hillprinties.com\/products\/trailer-for-big-jetty-1-6-trailer-for-axial-scx6?variant=56783808758138\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1418 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 468 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 432 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 10,000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 15,000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 4074 1400kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x ESC 150A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4x 3-6s Lipo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\"\u003e\u003c\/a\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eIf you want to build the boat with M-Jet Pump follow these links:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eM-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003eM-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783658418554,"sku":null,"price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_6214-Kopie-Kopie.png?v=1775823903"},{"product_id":"big-jetty-1-6-scale-twin-engine-river-jet-boat-w-o-jet-pump","title":"BIG JETTY - 1\/6 Scale  Twin-Engine River Jet Boat - W\/O Jet Pump","description":"\u003cdiv\u003eBig Is Beautiful!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOur twin-engine river jet boat BIG JETTY in 1\/6 scale was developed according to this motto.\u003cbr\u003e\u003cbr\u003eThe model is designed to integrate your M-Jet 30 or M-Jet 35 jet drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe print data includes all the necessary data for printing the hull, M-Jet 30 or M-Jet 35 integration, deck, cabin, roof, railing and add-on parts.  In this set the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPW40 Jet Pump\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis also\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincluded. Also the M-Jet pump need to be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epurchased separately\u003c\/strong\u003e!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBIG JETTY is one of the largest and most comprehensive RC boats for self-printing on the market.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe data package (STL, STEP, 3mf) consists of 253 different print parts, with a total of 670 components to be printed. The resulting level of detail sets new standards.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBIG JETTY impresses with its sheer size and high functionality (sliding windows, sliding door, folding deck, folding ladder, lighting, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIt therefore places high demands on the builder both in terms of assembly and driving.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data (STL + 3mf), the data package contains detailed, illustrated assembly instructions (122 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1R-oI169ac7jpPO8FSFkwSOGmQeaHh5IV?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThe model can be printed in PLA tough, PETG or ABS\/ASA. The double-walled hull gives the boat great stability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor demanding trips, we strongly recommend printing in ABS\/ASA. We have had the best experiences with Polymaker PolyLite ASA and ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThere is a matching trailer for your Axial SCX6 \u003ca href=\"https:\/\/hillprinties.com\/products\/trailer-for-big-jetty-1-6-trailer-for-axial-scx6?variant=56783808758138\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1418 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 468 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 432 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 10,000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): approx. 15,000 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users and model makers.\u003ca href=\"https:\/\/www.instagram.com\/hillprinties\/\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e1x M-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003e1x M-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE - The M-JET pumps are not part of that offer !!!\u003cbr\u003eNOTE - In this offer the HPW40 jet pump is NOT included\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 256x256x256 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783800467834,"sku":null,"price":66.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_6214-Kopie-Kopie-Kopie.png?v=1775824525"},{"product_id":"trailer-for-big-jetty-1-6-trailer-for-axial-scx6","title":"TRAILER For Big Jetty - 1\/6 Trailer For AXIAL SCX6","description":"\u003cdiv\u003eThis design is a true-to-original trailer for your Axial SCX6 RC model to launch the popular 1\/6th scale river jet boat \"BIG JETTY\" in style. The model is characterized by its scale look and is equipped with 4 pendulum axles. The trailer can also be parked with the boat thanks to the extendable and retractable jockey wheel. The print data (STL, STEP, 3mf) contains all the necessary data for printing the frame, axles, jockey wheel and accessories. The trailer has limited off-road capability and is fitted with 8 1:10 scale crawler tires (outer diameter 100 mm).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eGreat fun both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (49 pages) as well as illustrated printing instructions (21 pages). A complete parts list is also included as an Excel document. This contains a list of all required pressure parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003cbr\u003e\u003cbr\u003eThe required Rear Bumper for mounting the hitch is purchasable \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/rear-bumper-for-trailer-use-axial-scx6?variant=56783443100026\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eAll documents are listed \u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1R-oI169ac7jpPO8FSFkwSOGmQeaHh5IV?usp=drive_link\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1539 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 476 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 220 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 2800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 3500 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling for Axial SCX6, click \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_oBVDeEu\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e8x 1\/10 scale crawler tires\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e16x oil pressure shock absorbers 80 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e20x ball bearings DIN 625 - 61800\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown on the photos is NOT part of the offer. You can find it here:\u003cbr\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/big-jetty-1-6-scale-twin-engine-river-jet-boat-hpw40-incl-have-it-all?variant=56783658418554\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e1\/6 Scale Big Jetty\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The pictured vehicle is not part of the offer, it is an AXIAL SCX6\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56783808758138,"sku":null,"price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/Trailer_Twin_5.1.png?v=1775824988"},{"product_id":"fjordling-into-jetling-conversion-kit","title":"FJORDLING into JETLING Conversion Kit","description":"\u003cdiv\u003eAll files to make your HillPrinties FJORDLING into a JETLING.\u003cbr\u003e\u003cbr\u003eYou will need the required HPW40 Jet Pump motor \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/hpw40-2-stage-water-jet-pump?variant=56783487205754\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eOR Build it with one of the M-Jet Pumps\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e1x M-Jet 30 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-35-3d-printable-jet-pump-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eOR\u003cbr\u003e1x M-Jet 35 jet drive, you can get \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.cgtrader.com\/3d-print-models\/hobby-diy\/hobby-accessories\/m-jet-3d-printable-jet-drive-for-rc-boats\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAll documents, build guides and BoMs are \u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1fF9jtsA85c3wKst2D1NZhssNgnrya3qI?usp=drive_link\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56793939411322,"sku":null,"price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/2_d167feac-5a26-4beb-b71d-74cc05e5372f.png?v=1776080894"},{"product_id":"jetling-into-fjordling-conversion-kit","title":"JETLING into FJORDLING Conversion Kit","description":"\u003cp\u003e\u003cspan\u003eAll files to make your HillPrinties JETLING into a FJORDLING.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will need the required HPW250RT Outboard motor, link \u003ca href=\"https:\/\/hillprinties.com\/products\/hpw250rt-1-6-scale-trimmable-outboard?variant=56783606808954\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll documents, build guides and BoMs are \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1fF9jtsA85c3wKst2D1NZhssNgnrya3qI?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56794370507130,"sku":null,"price":8.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/1.png?v=1776081006"},{"product_id":"mini-ripper-1-10-sclae-river-jet-boat-hpw25-incl","title":"MINI RIPPER - 1\/10 Sclae River Jet Boat - HPW25 Incl.","description":"\u003cdiv\u003eThis design is the small version of our popular River Jetboat in 1\/10 scale. The model is powered by a 25 mm jet drive with an attached 1 kW brushless motor on maximum 3S LiPo. The print data includes all the necessary data for printing the hull, jet drive, windshield, railing, planking, cockpit, boat stand and accessories. The Mini Ripper is extremely maneuverable and fast, yet easy to drive and a lot of fun to assemble and drive. In addition to the print data, the data package contains detailed, illustrated assembly instructions (21 pages) as well as illustrated printing instructions (24 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1tqSsAaq7Q9tt3c0AETX21f3hz29sli6z?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA, PETG or ABS. The hull gives the boat great stability and also allows it to pass over obstacles such as stones or branches. This means that there are no limits to its appropriate use. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe HPW25 jet drives should preferably be printed in ABS, alternatively you can also try printing in PLA+, PLA tough or CF filaments.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 504 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 213 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 156 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 1,300 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 2,610 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2948 3450kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eESC 70A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x max. 3s Lipo (weight less than 320 g)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 200x200x160 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56794789937530,"sku":null,"price":16.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_4918.jpg?v=1776081473"},{"product_id":"mini-speedster-1-10-scale-river-jet-boat-hpw25-incl","title":"MINI SPEEDSTER - 1\/10 Scale River jet Boat - HPW25 Incl.","description":"\u003cdiv\u003eThis design is the small version of our popular River Jetboat in 1\/10 scale. The model is powered by a 25 mm jet drive with an attached 1 kW brushless motor on maximum 3S LiPo. The print data includes all the necessary data for printing the hull, jet drive, visor, planking, cockpit, boat stand and accessories. The Mini Speedster is extremely maneuverable and fast, yet easy to drive and a lot of fun to assemble and drive. In addition to the print data, the data package contains detailed, illustrated assembly instructions (21 pages) as well as illustrated printing instructions (24 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1tqSsAaq7Q9tt3c0AETX21f3hz29sli6z?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA, PETG or ABS. The hull gives the boat great stability and also allows it to pass over obstacles such as stones or branches. This means that there are no limits to its appropriate use. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 504 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 213 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 110 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 1,300 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 2,610 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2948 3450kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eESC 70A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x max. 3s Lipo (weight less than 300 g)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 200x200x160 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56795320516986,"sku":null,"price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_5045.jpg?v=1776081657"},{"product_id":"trailer-for-miniripper-1-10-scale-trailer-for-crawlers","title":"TRAILER For MiniRipper - 1\/10 Scale Trailer for Crawlers","description":"\u003cdiv\u003eThis is the trailer for your 1\/10 scale crawler to bring the popular 1\/10 scale \"MiniRIPPER\/MiniSPEEDSTER\" river jet boat to the water in style. The model is characterized by its scale look and is equipped with a sprung axle. In addition, the trailer can also be parked with the boat thanks to the fold-out and fold-in support. The print data includes all the necessary data for printing the frame, axles, support and accessories. The trailer has limited off-road capability and is fitted with 2 70 mm scale crawler tires (purchased or self-printed).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eGreat fun both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (19 pages) as well as illustrated printing instructions (17 pages). A complete parts list is also included as an Excel document. This contains a list of all required pressure parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca rel=\"noopener\" href=\"https:\/\/drive.google.com\/drive\/folders\/1dGheJDW8VPD7OE_egudcNoqZD0OMTAj8?usp=drive_link\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 549 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 228 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 144 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 500 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 750 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003ca href=\"https:\/\/youmagine.com\/hillprinties\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eClick here to go directly to the appropriate boats:\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/mini-ripper-1-10-sclae-river-jet-boat-hpw25-incl?variant=56794789937530\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/mini-ripper-1-10-sclae-river-jet-boat-hpw25-incl?variant=56794789937530\" target=\"_blank\" rel=\"noopener\"\u003e1\/10 Scale MiniRIPPER\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/mini-speedster-1-10-scale-river-jet-boat-hpw25-incl?variant=56795320516986\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e1\/10 Scale MiniSPEEDSTER\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x 70 mm crawler tires (Hex5)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2x oil pressure shock absorbers 54 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e4x ball bearings DIN 625 - 115\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown in the photos is \u003cstrong\u003eNOT \u003c\/strong\u003epart of the offer.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 230x230x160 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56795950678394,"sku":null,"price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_6358.jpg?v=1776082149"},{"product_id":"hpw25-2-stage-water-jet-pump","title":"HPW25 2-Stage Water Jet Pump","description":"\u003cdiv\u003eThis design is a true-to-original 2-stage water jet drive for RC models.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe jet drive has a nominal diameter of 25 mm and is designed for operation with 0.8 - 1.2 kW brushless motors up to 3s LiPos.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll necessary data for printing the housing, stator, stator housing, impellers and accessories are included.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNOTE:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe jet drive can be installed in any boat thanks to the included hull insert. The hull insert can simply be glued into your hull.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe HPW25 is extremely powerful and achieves amazingly high top speeds for jet propulsion systems. Thanks to the 2-stage design, our water jet drives are insensitive to the intake of air.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe drive is a lot of fun, both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (11 pages) as well as illustrated printing instructions (23 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, servo, etc.)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/12o1ZK0wcqbORv-XFy_KPQqkmb_lio7V8?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe model should preferably be printed in ABS, alternatively an attempt can also be made to print in PLA+, PLA tough or CF filaments.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 166 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength with 2948 motor: 214 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 59 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 57.9 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 150 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 380 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e2948 3450kV brushless motor\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eESC 70A\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 3s Lipo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x 25 kg waterproof standard servo\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x shaft seal ring 5x16x5\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x sealed stainless steel ball bearing 5x13x4\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x sealed stainless steel ball bearing 5x11x4\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x ground 5 mm stainless steel shaft 120 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e3x 3 mm stainless steel shaft 67.5 mm long (inlet)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eRemote control and receiver\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eVarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: \u003cspan\u003e150x150x175 \u003c\/span\u003emm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56795955593594,"sku":null,"price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/Unbenannt_63336a2c-7352-44d7-aefc-6ed31b114a9f.png?v=1776082541"},{"product_id":"trailer-for-defender-22-1-6-trailer-for-axial-scx6","title":"TRAILER For Defender 22 - 1\/6 Trailer For AXIAL SCX6","description":"\u003cdiv\u003eThis design is a true-to-original trailer for your Axial SCX6 RC model to launch the popular 1\/6th Scale Twin-Outboard Boat \"DEFENDER 22\" in style. The model is characterized by its scale look and is equipped with 4 pendulum axles. The trailer can also be parked with the boat thanks to the extendable and retractable jockey wheel. The print data (STL, STEP, 3mf) contains all the necessary data for printing the frame, axles, jockey wheel and accessories. The trailer has limited off-road capability and is fitted with 8 1:10 scale crawler tires (outer diameter 100 mm).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eGreat fun both to assemble and to drive.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition to the print data, the data package contains detailed, illustrated assembly instructions (66 pages) as well as illustrated printing instructions (21 pages). A complete parts list is also included as an Excel document. This contains a list of all required pressure parts, as well as a detailed description of the required add-on parts (incl. recommended tires, shock absorbers, etc.)\u003cbr\u003e\u003cbr\u003eThe required Rear Bumper for mounting the hitch is purchasable \u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/rear-bumper-for-trailer-use-axial-scx6?variant=56783443100026\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eAll documents are listed \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1pNgPTM1vseojUL1yVXcsRITGQvXse3ZL?usp=drive_link\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model can be printed in PLA tough, PETG or ABS. For particularly demanding rides, we recommend printing in ABS.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eTechnical data:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eLength: 1468 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWidth: 460 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eHeight: 270 mm\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (printed parts): approx. 2800 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eWeight (complete): 3500 g\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe model is aimed at experienced 3D printing users.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThe following components are additionally required and are not part of the offer:\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1x trailer coupling for Axial SCX6, click \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/s.click.aliexpress.com\/e\/_oBVDeEu\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e8x 1\/10 scale crawler tires\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e16x oil pressure shock absorbers 80 mm long\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e20x ball bearings DIN 625 - 61800\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003evarious small parts\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e(all components listed in BoM)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The boat shown on the photos is NOT part of the offer. You can find it here:\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hillprinties.com\/products\/defender-22-1-6-scale-twin-outboard-boat-have-it-all?variant=56783614771578\" target=\"_blank\" rel=\"noopener\"\u003e1\/6 Scale DEFENDER 22\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/hillprinties.com\/products\/big-jetty-1-6-scale-twin-engine-river-jet-boat-hpw40-incl-have-it-all?variant=56783658418554\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eATTENTION: The pictured vehicle is not part of the offer, it is an AXIAL SCX6\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56845304299898,"sku":null,"price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/IMG_1082.jpg?v=1777451104"},{"product_id":"big-jetty-defender-22-trailer-conversion-kit","title":"Big Jetty \/ Defender 22 TRAILER Conversion Kit","description":"\u003cp\u003e\u003cspan\u003eAll files to turn your HillPrinties Big Jetty TRAILER into a Defender 22 TRAILER and wise versa.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll documents, build guides and BoMs are \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1fF9jtsA85c3wKst2D1NZhssNgnrya3qI?usp=drive_link\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eNOTE: This offer includes only STL\/Step\/3mf files for self-3d-printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePrint bed dimensions: 250x250x250 mm (length x width x height)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eFor smaller installation spaces, the STL data must be cut independently or the arrangement in the printer must be changed (additional support may be necessary).\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eA 3mf slicer file is supplied for all components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eBambuLab A1\/P1P\/P1S\/X1\/H2D compatibility guaranteed!\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HillPrinties","offers":[{"title":"Default Title","offer_id":56846345863546,"sku":null,"price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/files\/DesignohneTitel_64405042-096e-4532-bf2f-336d4f70e76c.png?v=1777471324"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/6913\/8554\/collections\/Gemini_Generated_Image_j08qr7j08qr7j08q.png?v=1775732819","url":"https:\/\/hillprinties.com\/collections\/3d-print-files.oembed","provider":"HillPrinties","version":"1.0","type":"link"}