DEATHBOAT - 1/6 Scale River Jet Boat - HPW40 incl. - HAVE-IT-ALL

Go print your own Shreddy Deathboat/Mojo!

Our river jet boat DEATHBOAT in 1/6 scale was developed according to this motto.

The model is powered by a 40 mm HPW40 jet drive with an attached 2.2 kW brushless motor on 3-6S LiPos.
You can also install your M-Jet 30 or M-Jet 35. There are separate print files for these pumps also as part of the files package.

The print data includes all the necessary data for printing the hull, HPW40 jet drive, deck, rollcage, roof, visor and add-on parts.

DEATHBOAT is the successor and the logical development of our popular JET THE RIPPER/SPEEDSTER boat.

New features are the following:

3 BOAT VERSION IN ONE - you have the choice!!!

DEATHBOAT - Rollcage version
RIPPER - Windshield version (with roof and LED)
SPEEDSTER - Visor version

The data package (STL, STEP, 3mf) consists of approx. 120 different print parts, with a total of over 250 components to be printed. The resulting level of detail is outstanding.

It therefore places high demands on the builder both in terms of assembly and driving.

In addition to the print data (STL/Step + 3mf), the data package contains detailed, illustrated assembly instructions (76 pages) as well as illustrated printing instructions (22 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, ESC, servo, etc.).

 

The Upgrade Kit is also, which contains:

1. "Flash" Planking (multi-color print 3mf included):
-Front
-Lid (with or wihtout HillPrinties logo)
-Rear

2. Rollcage Spoiler
- Spoiler
- adapted Sidepanels (Standard Thinkness and 2,5 mm thick ones)

3. Fireextinguisher (multi-color print 3mf included):
- fits into the holes of the rollcage backside

 

All documents are listed here

The model can be printed in PLA tough, PETG or ABS/ASA. The double-walled hull gives the boat great stability.

For demanding trips, we strongly recommend printing in ABS/ASA. We have had the best experiences with Polymaker PolyLite ASA and ABS.

Technical data:

Length: 880 mm

Width: 355 mm

Height: 282 mm

Weight (printed parts): approx. 3,200 g

Weight (complete): approx. 5.340 g

The model is aimed at experienced 3D printing users and model makers!!!

Their are two matching trailers for the Axial SCX6 available:

The following components are additionally required and are not part of the offer:

1x 4074 1400kV brushless motor

1x ESC 180A

2x 3-6s Lipo

2x 25kg waterproof standard servo

Remote control and receiver

various small parts

(all components listed in BoM)

If you want to build the boat with an M-Jet Pump follow these links: